Page 1 of 2

Clutch problems..

Posted: Apr Wed 06, 2011 9:00 pm
by AKRadar
So my clutch went out today and I am needing some suggestions as to who I can take my bug into. I have the new bently but lack of tools hinder my diy project. Any suggestions would be appreciated.
Thanks

Re: Clutch problems..

Posted: Apr Wed 06, 2011 9:21 pm
by Roadhog
how do you lack tools to do the project? Jack, stands, standard wrenches...

Clutch problems..

Posted: Apr Wed 06, 2011 9:35 pm
by AKRadar
I have stands (x2) and standard wrenches.. Very few metric. Having never replaced a clutch does not help.. And a busy schedule is making it hard for diy.. Would love to learn how to do this though..

If someone has the patience to help me.. That would be great.. Even if they could help me replace with a better clutch than the dual mass flywheel.. Which seem so be problematic...

Re: Clutch problems..

Posted: Apr Wed 06, 2011 10:19 pm
by Roadhog
http://www.fourseasontuning.com/index.p ... =K7003802F

Well, I would take it anywhere BUT Jerry's Transmission.

Re: Clutch problems..

Posted: Apr Thu 07, 2011 10:57 am
by kompressorgolf
You mean you would take it anywhere but jerrys? or are you a repeat customer :)

it is pretty simple, but if its your only mode of transport i see your quarel.

Re: Clutch problems..

Posted: Apr Thu 07, 2011 10:58 am
by Mikewire
It's fairly straight forward, but you need to have the right tools for the job. #1 would be all metric sockets (16mm and 18mm specifically) and open end wrenches, #9(?) 12 point bit for the CV bolts, and a 12pt 9mm socket for the clutch pressure plate. Also, you will need a torque wrench for the flywheel and pressure plate bolts. I would say invest in tools, but I would also ask what your time is worth.

4 seasons is the dealership so you will pay the price - you could take it to Mountain Imports over on S. 3rd. Or, maybe Aeron would do a clutch job?

As far as a replacement, the Sachs VR6 flywheel and clutch kit from MJM Autohaus was a nice upgrade on my 2.o (I just bought the exact kit again for my VR6) and I would recommend it if it applies to your NB.

Re: Clutch problems..

Posted: Apr Thu 07, 2011 11:20 am
by Roadhog
kompressorgolf wrote:You mean you would take it anywhere but jerrys? or are you a repeat customer :)

it is pretty simple, but if its your only mode of transport i see your quarel.
Yes. lol :banghead:

Re: Clutch problems..

Posted: Apr Tue 12, 2011 3:18 pm
by AKRadar
SO... the clutch has been fixed... and it was just miles from exploding. I kept the original clutch as a souvaneer.. pix to follow shortly.

Re: Clutch problems..

Posted: Apr Thu 14, 2011 2:10 pm
by AKRadar
I am sure you have seen these... but here you go:<br>
Image
<br>
Image

Re: Clutch problems..

Posted: Apr Thu 14, 2011 4:14 pm
by kompressorgolf
DAMN! done it right!