Page 10 of 13
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 10:06 am
by Mikewire
I have a different transmission for it.
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 11:04 am
by SweaterVest
Do you know what tranny you're putting behind the R?
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 12:13 pm
by Roadhog
Mikewire wrote:I have a different transmission for it.

Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 12:21 pm
by YASHA7FOLD
Pretty sure mike is using this tranny
Sent from my iPhone using Tapatalk
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 12:42 pm
by Mikewire
Should be an 02A, but I need to confirm numbers. I just got a load of parts from Leifro, and this is one out of a Corrado I believe. And supposedly has a Pelican LSD already installed.
Lots of other parts as well, subframe shift box and linkage, downpipe, axles etc. Waiting on an MKIII gas tank, lines and pump. Pedal assembly and hydro setup from Benno coming as well.
Should be good for now! Looking at engine management options...AEM or MS2.
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 2:31 pm
by MT-Getto
That DP have my handwriting on it?
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 16, 2016 2:35 pm
by Mikewire
MT-Getto wrote:That DP have my handwriting on it?
I didn't look at it that closely, but I'll be checking for it now

Re: 1992 GTI R32 VR6 project...
Posted: May Tue 17, 2016 8:13 am
by kompressorgolf
from a local guy who has AEM says its really finicky, not sure why.... honestly i would look into running stock management. The comfort of knowing its gonna run all the time out of the box, and scannable at the same time. plus any configuration you can think of can be tuned on stock management. Will also have all the VVT which you cant run as thorough with standalone, basically you can turn the vvt on or off, but not variable as it should be without a ton of work. or so ive read....
Re: 1992 GTI R32 VR6 project...
Posted: May Tue 17, 2016 11:16 am
by Mikewire
Good info!
kompressorgolf wrote:from a local guy who has AEM says its really finicky, not sure why.... honestly i would look into running stock management. The comfort of knowing its gonna run all the time out of the box, and scannable at the same time. plus any configuration you can think of can be tuned on stock management. Will also have all the VVT which you cant run as thorough with standalone, basically you can turn the vvt on or off, but not variable as it should be without a ton of work. or so ive read....
Re: 1992 GTI R32 VR6 project...
Posted: May Mon 23, 2016 1:17 pm
by Leifro
YASHA7FOLD wrote:
Pretty sure mike is using this tranny
Sent from my iPhone using Tapatalk
That man whore trans gender wimp owes me on that $20 bet I lost. Mine was still bigger...